1.SUMMARY
The PMDC motor has such properties: small volume, high efficiency, low noise, and with the outside brush rocker constructional feature ,long-using time. The motor is widely used in office automation equipment ,Finance equipment , spectacles equipment.
2.MODEL:45ZY24-18
Power:18W
rated voltage: 24VDC
motor code:PMDC motor
frame size: motor’s outside diameter φ45mm
3.GENERAL SPECIFICATIONS
a.cold insulation resistance:cold insulation resistance of the conductive part of the motor to the housing is no less than 100MΩ.
b.insulation Dielectric strength: The conductive part and motor housing sufficient to withstand 500V lasting 1min.for pressureproof experiment can not be breaked under the rated voltage≤60V; theconductive part and motor housing sufficient to withstand 1500V lasting 1min.for pressureproof experiment can not be breaked under the rated voltage>60V.
c.Temperature Rise：≤75K
d.noise：≤55dB
4. OPERATTING CONDITIONS:
a.altitude no more than 2500m
b.Ambient temperature:－20℃～60℃；
c.Relative humidity≤90％（temperature 20℃；
5. STORAGE CONDITIONS:
a.Ambient temperature: －5℃～35℃；
b.Relative humidity≤70％
c.good ventilation
d.no corrosive gas present
e.no strong magnetite object present
6. NOTES:
a.To be sure input voltage grading correct
b.To avoid internal deformation,badly noise and antiseize,it’s prohibited to thrum and extrude strongly when with loading the output shaft.
c.Brush lifetime about 2000h, please replace it in time.
